Due 4 October, 1999
The purpose of this lab is to introduce you to Digital Design CAD tools and VHDL.
You should do this lab individually so you each get the experience of CAD design and VHDL programming.
Setup for this lab involves familiarizing yourself with the Altera Max+Plus II application and creating a directory for yourself on the PCs.
Task one is to build a tester for a 7-bit Hamming Code (described as the example in Wakerley, Chapter 1). There are 7 bits total, and three parity groups. Your circuit should have a single output that is high if the 7-bit input is invalid and low otherwise.
Your design and implementation process should use the following steps:
Task two is to build the input circuit for a simple 7-button microwave using VHDL. As in lab 1, the buttons on the microwave are: 1 min, 2 min, 3 min, 4 min, 5 min, beverage (2 min), and popcorn (5 min). The output of your circuit should be the BCD value indicating the number of minutes the microwave should be on.
For this task you should use only VHDL. Each button will be a separate input to your VHDL function, and you should think about this task as an if statement or a case statement, whichever is more appropriate.
Compile your program and use the simulator to demonstrate that it works correctly by selecting an appropriate number and range of input cases.
As before, if you follow the above steps, you will have the majority of your writeup for this lab completed. Clarity in your writeups is essential. Convey what you have done in a clear and concise manner, and in sufficient detail that someone else could replicate your work.
In addition to the design process steps mentioned above, your lab writeup should include the following:
As noted in the syllabus, you should keep a lab notebook for this course. In this notebook you should keep diagrams of any circuit you build, along with enough information to replicate it. This is separate from your lab reports, but will be handed in for evaluation with every other lab or so.